Description
Product Features
- Completely resin-based without any added water dilution.
- Non-toxic, no added solvents, water-based, and easy to use.
- RC structural surfaces can be directly coated under damp conditions.
- Compatible with cement surfaces such as old cement or brick-based surfaces.
Specifications
| RH-201 Elastic Cement | ||
| Appearance | White Acrylic Resin | |
| Tensile Strength (kgf/cm2) | >70 | |
| Elongation (%) | >500 | |
| Tear Strength (kgf/cm2) | >35 | |
| Adhesion Strength (kgf/cm2) | >35 | |
| Permeability WVTR (grains/hr/ft2) | 0.08 | |
| Abrasion Resistance (mg, Taber CS17 100g 100 rev) | 5.0 | |
Application
- Used for waterproofing structures, roofs, balconies, terraces, bathrooms, kitchens, general gardens, and basement waterproofing projects.
- Applied to external walls of buildings, ceramic tiles, cement mortar surfaces, and lightweight concrete walls as anti-cracking and waterproofing layers.
- Waterproofing and wall repair for new and old cement roofs and exterior walls
Application Method
- Remove dust, oil stains, algae, and other contaminants from the surface.
- Apply RH-102 as basecoat and mix with water with 1:1 or 1:2 ratio. Apply 1 time.
- Mix RH-201 Elastic Cement with 20~30kg of aggregate until slurry-like texture. Apply 2~3 times.
- Finish off with RH-400 as a topcoat for UV protection.
- If the topcoat is not used, apply heat-resistant tiles or other materials.
Packaging
- RH-201 : 18 kg/container
- Aggregate : 20 kg/bag
